> For the complete documentation index, see [llms.txt](https://docs.vega365.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.vega365.com/redundancy-management-framework/user-manual/configuration-dashboard/scheduling-runs/enable-the-smartsync-scheduling.md).

# Enable the SmartSync Scheduling

Enable the Scheduling feature in Redundancy Configuration for SmartSync Service to automate synchronization and ensure seamless data updates at predefined intervals.

## Prerequisites

Before enabling scheduling, ensure that the following prerequisites are met.

* [Architecture Selection](https://docs.vega25.com/configuration/architecture-selection) - Define and configure the system architecture.
* [Server Labeling](https://docs.vega25.com/configuration/server-labeling) - Classify recorders on both sites as either primary or secondary.
* [Server Linking](https://docs.vega25.com/configuration/server-linking) - Establish connections between the servers within the RMF environment.

## Scheduling Enablement and Configuration

Once the prerequisites are completed, follow these steps to enable and configure scheduling:

1. Open the **Milestone XProtect Management Client**.
2. Navigate to **MIP Plug-ins** > **RMF** > **Redundancy Configuration**.<br>

   <figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXcRzgvi33xGXwM7idCYJAguRGM-XSeIwV6ZK9lM3HfFT9G2nPhGVNDh7eMdtKJ84NBHpgCdbH5RfDnJjnq6-g2RKwboYjN0M3X6raNAFmWDxsYQiJ4AAVZhncsqdKKh9Qn8itKqnA?key=ijto1pgygXfVgdz4n0tBAi0Z" alt=""><figcaption><p>RMF Settings Home Page</p></figcaption></figure>
3. Locate the **Scheduling** radio button at the bottom right of the page. The scheduling feature is turned off (<img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXfN80AV-fpiowq2gTD7jsJaS6f_cvMvuH2-ZfzIjFC5QCHxLzaZZQmzL2OGEh4QSvx_XfeATdrqqY5XnMP-nK8NsLB46gMIfveXRr1IffQSG6uBFFNnOL4qy4fgzilC2sCtAUwb4Q?key=ijto1pgygXfVgdz4n0tBAi0Z" alt="" data-size="line">) by default.
4. Click the **Scheduling** radio button to turn it ON (<img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXfK76YgAid111XK0HqgyJvX9LX68-9uhTX-I2_IwAYNfGrRFcYXZCKgoGC1eTo9wPyBcf6F-NVxeZs7JCr7Yy_baaxuLEN47VrTwqWnsAW_JwPYkFVkQEjmRsxzlxdXINNYhosKwg?key=ijto1pgygXfVgdz4n0tBAi0Z" alt="" data-size="line">). When scheduling is turned ON, the Schedule Settings pop-up window appears.\
   ![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXdrTl6QaYO3znepbaIScaj_MySNCE6HDgmAK_1tLJEKB7U5PqgAjFvhcJUDNNS47QdKTymlqWV2f1CrxcZbAZBJEVOiFXBjJO94GE78H4vEbJ_L_-Zakymt1_i4lXrzARMjS0cZ1w?key=ijto1pgygXfVgdz4n0tBAi0Z)
   1. **Confirm Button (✔ icon)** – Saves and applies the selected scheduling interval. The system will then execute synchronization based on the specified frequency.\
      ![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXfR-DPYPUhUXlSae10gBXVm6kbJDvyIttS3RFWMnMaYjczNPFcZPlZ7sEPne2Eoyiq1MywaFUMnUYQ_eFG1ij9pApr9Juvm8nfDQ-sZlBTkog8DwZr-EYX7Z5i-gbcY_BXU8TGR?key=ijto1pgygXfVgdz4n0tBAi0Z)
   2. **Cancel Button (X icon)** – Closes the schedule settings window and returns to the previous/home page without saving any changes.\
      ![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXeQQjhjMvS3sgEa8YcMKZSBVmzPzucTrmG9vQvLtXpfYUHF379Xc0DZRT700n10kqSAe532A6U9GyRCjhcKhUuM_Gn9Sto1boGMxw9ofFmTkBLxzU8S-1yKzmljylBY9KznU5S5GA?key=ijto1pgygXfVgdz4n0tBAi0Z)
   3. **Help Button (? icon) -** Refer to the illustrative images below.\
      ![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXe5LlCGCTJGaT0_zjn2s8THmoJfScT79OMzuBSJ_kpk3JudnftFwDCfhCDp6eHE3_UlnSw8h_Hh_Ir6mdssLLEtuWzkkBX0xozCWwHMJKsVptilpWUFfc1NERRPaeAJkx6TMIlJFQ?key=ijto1pgygXfVgdz4n0tBAi0Z)\
      \
      For example,

      1. Processing Started - The system begins synchronization.\
         Note: The processing time for each cycle may vary depending on the number of cameras distributed across the servers. A higher number of cameras could lead to increased data load and longer processing durations, while a lower number of cameras may result in faster processing times.
      2. Processing Ended - After the synchronization process completes (for example, at 10:25 or 10:45, as shown in the picture above), the system enters an idle state.
      3. Idle for Configured Interval - The system remains idle for the user-defined duration (for example, 10 minutes), specified in the ‘Schedule Settings’, before initiating the next synchronization cycle.

      <figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXcbD54ZhH3VpawowX2zt1SlSwvfc0xe029QPiAO1DSrHs7vaVhUIIdXbC-cQeHrVXv56Cp9y72zvysCbGBNrPDgy2aggj4A0sHOTjHmWkeRzkzc8Lj7DL1HxRgI_wlEmk6dhXwFpQ?key=ijto1pgygXfVgdz4n0tBAi0Z" alt=""><figcaption><p>Help Page</p></figcaption></figure>
5. Click the **Save** button at the top-left corner of the page to apply scheduling settings and confirm the update. A pop-up window will appear, presenting two options for selecting when the synchronization process should begin.

   1. **Start Now**\
      ![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXfjqGGLLKALeFxO53Ilymc5qmHNpFgiyIfbeY0ERRiDsHRfSt1iOpkCJ7m89rzOlsmLJPST-dlA2uqzGw5q-EFUp2PYlP7g64BNUX0DVFq3TnxaZqc6gsy_ikmaRwRPLcmID2oW?key=ijto1pgygXfVgdz4n0tBAi0Z)
      * Clicking the **Start Now** button immediately initiates the synchronization process, overriding the scheduled time.
      * Useful when users want to trigger synchronization without waiting for the next scheduled run.
   2. **Start Later**\
      ![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXe8c9wU5yd0EW5k5GdqbW5k-KaxhmF5oVHy8gexOYMr6FIrOzRCy28iZn-hMynPIqGcRI0uXDgS_3lfyHDgCGfprhX_dWApw15i3W8uQJ_zNZdZ00dJBK9VIwnhDoUh2DHljlwwWQ?key=ijto1pgygXfVgdz4n0tBAi0Z)
      * Clicking the **Start Later** button schedules the synchronization to run at the specified date and time.
      * The system will execute synchronization automatically according to the configured interval.

   <figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXdy6G3LxLDNsN67S1PFIVuuLYDqhoz_DrT4Ub3_LTUlIeqIDA03x0dG0IG86U4XcFppryVcs5slRs_B3nAkOocfTUzV9qq0ByctGi0sdD02pM89RsI2MfvhzBPm4SQIfh0pXwCb?key=ijto1pgygXfVgdz4n0tBAi0Z" alt=""><figcaption><p>Save Button</p></figcaption></figure>

   <figure><img src="https://lh7-rt.googleusercontent.com/docsz/AD_4nXcjS8GcQ-qIBOOoQG9ipXRwXiOr2GYY4RrBTvt6XQ48VDt9pRo-JrgiH1bTM0DwJXvAv_vrh392Lo-iXW-cIBk3sl8WOnat5qhIkWW6Q_Wu6u28kmHKPbtZeqDWaX8zCtL9KElK?key=ijto1pgygXfVgdz4n0tBAi0Z" alt=""><figcaption><p>Pop-up Window with Two Options</p></figcaption></figure>

{% hint style="info" %}
Once saved, the RMF SmartSync Service will execute synchronization based on the specified schedule.
{% endhint %}
