> For the complete documentation index, see [llms.txt](https://docs.vega365.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.vega365.com/redundancy-management-framework/user-manual/configuration-dashboard/storage-linking.md).

# Storage Linking

Link the Primary and Secondary Storage profiles.

## Introduction&#x20;

Use **Storage Linking** to inform RMF how the retention rules on each Primary recorder are translated **to its Secondary**. Here, you map every storage profile on a Primary (e.g., *“30-Day Local”*, *“7-Day Edge”*) to the profile that should be applied on the Secondary (e.g., *“90-Day DR”*, *“14-Day Cloud”*). When SmartSync later detects a new camera—or you switch an existing one—to a given profile on the Primary, it automatically assigns the camera to the corresponding profile on the Secondary.

If no mapping is defined, SmartSync falls back to the Secondary’s default storage profile, which may not provide the expected retention. Therefore, create explicit links first to ensure your long-term, short-term, and regulatory retention tiers are perfectly aligned.

In **Manual Mode –** Because cameras can be routed to multiple secondaries, RMF first compiles a table of **every unique primary-to-secondary** pairing created by your camera map. For each pairing, you must define how the primary’s storage profiles translate to the secondary’s profiles; if you leave a pairing blank, the secondary will use its default profile whenever a camera from that primary is synced.

## Prerequisite

Complete [Server Linking](https://docs.vega365.com/redundancy-management-framework/user-manual/configuration-dashboard/server-linking.md)or [Map Cameras](https://docs.vega365.com/redundancy-management-framework/user-manual/configuration-dashboard/map-cameras.md)

## Link the Storage Profiles

Perform the following steps to link the Storage profiles.

1. Click **Storage**.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/T9RTHPL2VbLGLVxhrjUT/Storage1.png" alt=""><figcaption><p>Storage Option</p></figcaption></figure>

**Step Result:** The Data Refresh Tool Dialog box appears.

a. For an **Independent architecture**, the following screen appears:

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/nRVSx2bYdVPGzKqKSl6p/Login%20screen-Ind.png" alt=""><figcaption><p>Login Screen—Independent</p></figcaption></figure>

{% hint style="info" %}
**Note:** You must log in with administrator privileges.
{% endhint %}

Click **Connect** at the bottom right corner of the screen to continue.<br>

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/1Utav3iPw2hzaEJgKdLd/Connect.png" alt=""><figcaption><p>Connect Option—Independent</p></figcaption></figure>

For **Federated/Single Site**, the following screen appears:

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/xEbRdYhAOCHjpMJY2BEe/Login2.png" alt=""><figcaption><p>Login Screen—Federated/Single Site</p></figcaption></figure>

{% hint style="info" %}
&#x20;**Note:** If your XProtect architecture is **Federated**, log in to the **Parent Management Server**.&#x20;
{% endhint %}

Click **Connect** at the bottom right of the screen to continue.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/8YZUJ8o9MiQ73WWWpWK8/Connect3.png" alt=""><figcaption><p>Connect Option—Federated/Single Site</p></figcaption></figure>

{% hint style="success" %}
**Step Result:** The following screen appears.
{% endhint %}

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/QIWzlogzvGV4gt7qPJwj/Storage%20screen.png" alt=""><figcaption><p>Storage Screen</p></figcaption></figure>

2. Select one of the Primary and Secondary recorder pairs from the list of linked servers that were associated in the previous step.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/VLl6NAUCpByoSZxAWYgU/Step1.png" alt=""><figcaption><p>Primary and Secondary Server Pair</p></figcaption></figure>

{% hint style="success" %}
**Step Result:** The selected server pair is listed under the **Selected Pair** section. Also, the list of Storage profiles for the selected Primary and Secondary server pairs is visible.
{% endhint %}

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/l36Fa2Fa3x4ik3LYaiim/SelectedPair.png" alt=""><figcaption><p>Selected Pair of Servers</p></figcaption></figure>

{% hint style="info" %}
**Note:** To view more information about the storage profiles, such as Retention time, Path, and Size, hover over the storage profiles listed.
{% endhint %}

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/rEBFNW1YrhEJ2bKTHNzj/Moreinfo.png" alt=""><figcaption><p>Storage Server Additional Information</p></figcaption></figure>

3. Click the **Help** icon to view additional information about Storage Linking.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/W3DmQmE5E1eqevHTP1Pk/Help.png" alt=""><figcaption><p>Help Icon</p></figcaption></figure>

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/GTVTIWmIvFGzPBH5Wxgc/HelpInfo.png" alt=""><figcaption><p>Help Information</p></figcaption></figure>

4. &#x20;Select one of the Storage Profiles under the **Primary Server Storage**.
5. Click the **drop-down** menu in the **Secondary Server Storage** section.&#x20;

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/zPUAZV0wiaG3uaz6bDDI/drop-down.png" alt=""><figcaption><p>Secondary Storage Server Drop-down</p></figcaption></figure>

6. Select the relevant Secondary Storage Profile from the **drop-down**.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/kKQATw6ii4lYYO5OIaiy/secondary.png" alt=""><figcaption><p>Secondary Server Storage Profile</p></figcaption></figure>

7. Click the **tick mark** at the bottom of the screen to save the changes.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/hNw2zZ5t74TX0He9AtD0/tickmark.png" alt=""><figcaption><p>Save Icon</p></figcaption></figure>

8\. Click **Save** in the Milestone toolbar to save the changes.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/90IOHPpyYobrykj5SLHM/MilestoneSave.png" alt=""><figcaption><p>Save Icon—Milestone Toolbar</p></figcaption></figure>

<br>

<br>

<br>
