> For the complete documentation index, see [llms.txt](https://docs.vega365.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.vega365.com/redundancy-management-framework/user-manual/configuration-dashboard/synchronize-device-output.md).

# Synchronize Device Output

Precision Synchronization for Output Settings

## About

Use this option to synchronize Speaker settings between the Primary and Redundant sites.&#x20;

## Scope

The scope is limited to RMF-licensed devices selected by the [Device Selection](https://docs.vega365.com/redundancy-management-framework/user-manual/configuration-dashboard/device-selection.md) block and to the features listed under the "Settings here correspond to" section in the picture below.  The direction of synchronization depends on the direction setting. See [Set Synchronization Direction](https://docs.vega365.com/redundancy-management-framework/user-manual/configuration-dashboard/set-synchronization-direction.md).  If no devices are selected in the Device Selection block, this option is disabled.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/EccVNMYtj5ff68Q6dnyI/Outputsettings2.png" alt=""><figcaption><p>View Output Settings—Site Navigation Pane</p></figcaption></figure>

## Enable

To enable and synchronize the device output settings, perform the following steps:

1. Click **Output**.

{% hint style="info" %}
**Note:** For the Output block to be clickable, at least one device must be selected from the&#x20;

Devices section. For more information, refer to [Device Selection](https://docs.vega365.com/redundancy-management-framework/user-manual/configuration-dashboard/device-selection.md)
{% endhint %}

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/5Ucx4NGjXE7ommTdHM6r/Output.png" alt=""><figcaption><p>Output Option</p></figcaption></figure>

2. Enable the **Overall Output Settings Sync** to enable all the individual device output settings. Enable/Disable different sub-settings as needed.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/bYWau2zaW54lzHxS8aaa/Outputsettings.png" alt=""><figcaption><p>Output Settings Screen</p></figcaption></figure>

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/CMqMuTHY0xX0Tv9QyCUM/OutputRequired.png" alt=""><figcaption><p>Synchronize the Required Output Settings</p></figcaption></figure>

3. To retain the settings, click the **Check Mark** button.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/MEWcStT4NFFwDz56XVxv/OutputSave.png" alt=""><figcaption><p>Check Mark Button</p></figcaption></figure>

4. Click **Save** in the Milestone toolbar to save the changes.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/xZX2pLkrgPGIApnCXP4Q/OutputMilestone.png" alt=""><figcaption><p>Save Icon—Milestone Toolbar</p></figcaption></figure>

## Disable

To disable and synchronize the device output settings, perform the following steps:

1. Click **Output**.

{% hint style="info" %}
**Note:** For the **Output** block to be clickable, at least one device must be selected from the&#x20;

**Devices** section. For more information, refer to [Device Selection](https://docs.vega365.com/redundancy-management-framework/user-manual/configuration-dashboard/device-selection.md)
{% endhint %}

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/5Ucx4NGjXE7ommTdHM6r/Output.png" alt=""><figcaption><p>Output Option</p></figcaption></figure>

2. Enable the **Overall Output Settings Sync** to enable all the individual device output

   settings. Enable/Disable different sub-settings as needed.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/a91Bjzz7usfvK1Rw0Mxp/OutputDisable.png" alt=""><figcaption><p>Output Settings Disabled</p></figcaption></figure>

3. Click **Save** in the Milestone toolbar to save the changes.

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/qcvNsP3x85HlEr6hS1Yp/OutputMilestone2.png" alt=""><figcaption><p>Save Icon—Milestone Toolbar</p></figcaption></figure>

{% hint style="success" %}
**Step Result:** The **Output** settings option is disabled.
{% endhint %}

<figure><img src="https://content.gitbook.com/content/K95oxUATgzuZZ2VhRoDw/blobs/BXx7wzt69JZtKX1YuIvo/OutputDisabled2.png" alt=""><figcaption><p>Disabled Output Settings Option</p></figcaption></figure>
