> For the complete documentation index, see [llms.txt](https://docs.vega365.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.vega365.com/surestream/management-client/camera-dashboard.md).

# Camera Dashboard

The dashboard (**MIP Plug-ins > SureStream > Configuration**) shows every XProtect camera, whether it is in SureStream, and for the cameras in SureStream whether they are ready to stream and what to do if not.

<figure><img src="https://2606467887-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrW97Kdzpc3CRKor6jdzu%2Fuploads%2Fgit-blob-ec7b93ef36c783970a78485b0fd6f41178e30af8%2Fmc-dashboard-in-surestream.png?alt=media" alt="Camera dashboard"><figcaption><p>The dashboard, In SureStream view</p></figcaption></figure>

## Header

* **Licences: X of Y used**: licences in use and in total. It also says when licences are used on other sites or by removed cameras, when some aren't activated in XProtect yet, and when none are left.
* **last tested**: when the cameras were last tested from this PC. Results from an earlier session are shown in grey until the cameras are tested again.
* **Settings** opens the [Settings](https://docs.vega365.com/surestream/management-client/settings.md).
* On the right, the save state: **Saving changes...**, **All changes saved at** *time*, or a red line if the change couldn't be saved.

## Two views

Click a tile to switch views:

| Tile                  | Shows                                                                                                                          |
| --------------------- | ------------------------------------------------------------------------------------------------------------------------------ |
| **In SureStream**     | The cameras in SureStream (each camera device uses a licence), with their status. Check them, fix their problems, remove them. |
| **Not in SureStream** | The cameras in XProtect that aren't in SureStream yet. Select them and click **Add to SureStream**.                            |

In the **In SureStream** view, two more tiles filter the list (click again to clear the filter):

* **OK**: passed the last test, streaming directly to Smart Clients.
* **Needs attention**: licensed cameras with a problem. They use a licence but don't stream as they should: deleted in XProtect, can't be reached, login refused, clock out of sync, no video profile.

## The camera list

Cameras are grouped by recording server (and by site, on a federated hierarchy). Open a group with its arrow or a double-click. A group row shows how many of its cameras are OK or need attention; selecting it selects all its cameras.

| Column           | Shows                                                                                                                                                                                         |
| ---------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Camera**       | The camera's name in XProtect.                                                                                                                                                                |
| **Status**       | **OK**, or the problem (see [Fixing Camera Problems](https://docs.vega365.com/surestream/management-client/fixing-camera-problems.md)). Cameras not in SureStream show **Not in SureStream**. |
| **Address**      | The camera's address.                                                                                                                                                                         |
| **Licensed**     | Yes or No.                                                                                                                                                                                    |
| **Details**      | What the last test found. For a camera that streams a different stream than XProtect's (because the camera can't give XProtect's), it says which.                                             |
| **Video**        | The stream SureStream set up, for example *H264 1920x1080*.                                                                                                                                   |
| **Last checked** | When the camera was last tested from this PC.                                                                                                                                                 |

Click a column header to sort (Status sorts the worst first). Use **Search camera, address or recorder** to find cameras, and **Select all shown** (or Ctrl+A) to select every camera the tiles and search show.

Select a camera to see, under the list, what's wrong and how to fix it:

<figure><img src="https://2606467887-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrW97Kdzpc3CRKor6jdzu%2Fuploads%2Fgit-blob-ccda0b948757320684fb8134de380375055ce72f%2Fmc-dashboard-needs-attention.png?alt=media" alt=""><figcaption><p>Needs attention: a camera that can't be reached</p></figcaption></figure>

{% hint style="info" %}
Test results are kept on each Management Client PC. Cameras in SureStream that haven't been tested from this PC yet (for example after an upgrade, or on another administrator's PC) are tested in the background when the dashboard opens.
{% endhint %}

## Buttons

| Button                     | View              | What it does                                                                                                                                                                                                                       |
| -------------------------- | ----------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Refresh list**           | Both              | Reads the camera list from XProtect again; no camera is contacted. Finds cameras added in XProtect, and cameras in SureStream that were deleted or disabled in XProtect (they show **Deleted in XProtect** under Needs attention). |
| **Check selected**         | In SureStream     | Tests the selected cameras: network, ONVIF login, video profile and clock. Nothing on the cameras is changed. Double-clicking a camera does the same.                                                                              |
| **Fix time**               | In SureStream     | Shown when a selected camera's clock is out of sync. See [Fix time](https://docs.vega365.com/surestream/management-client/fixing-camera-problems.md#time-out-of-sync).                                                             |
| **Sync with XProtect**     | In SureStream     | Takes XProtect's changes for the selected cameras. See [Sync with XProtect](#sync-with-xprotect).                                                                                                                                  |
| **Remove from SureStream** | In SureStream     | See [Removing cameras](#removing-cameras).                                                                                                                                                                                         |
| **Add to SureStream**      | Not in SureStream | See [Adding cameras](#adding-cameras).                                                                                                                                                                                             |

While cameras are being tested, a line shows the progress (*Checking N cameras, 32 at a time. You can keep working.*) with a **Stop** link. The cameras tested so far keep their results.

## Right-click

Right-click selected cameras for the actions that apply to them. The fix for their problem comes first, in bold.

<figure><img src="https://2606467887-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrW97Kdzpc3CRKor6jdzu%2Fuploads%2Fgit-blob-a67b678a5ab60b4551f6d1b96ef2078e088c6911%2Fmc-dashboard-right-click.png?alt=media" alt=""><figcaption><p>Right-click on a camera whose clock is out of sync</p></figcaption></figure>

| Item                                                                                                                                                | What it does                                                                                                                                                                          |
| --------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Fix the time...** / **Change the camera access...** / **Open the camera's web page to fix it** / **Remove from SureStream (deleted in XProtect)** | The fix for the selected cameras' problem (only those that apply).                                                                                                                    |
| **Check again**                                                                                                                                     | Tests the selected cameras.                                                                                                                                                           |
| **Sync with XProtect**                                                                                                                              | See below.                                                                                                                                                                            |
| **Camera access...**                                                                                                                                | The login SureStream uses with the camera. Opens [Settings > Camera access](https://docs.vega365.com/surestream/management-client/settings.md#camera-access) with the cameras ticked. |
| **Mirroring and rotation...**                                                                                                                       | Opens [Settings > Mirroring and rotation](https://docs.vega365.com/surestream/management-client/settings.md#mirroring-and-rotation).                                                  |
| **Network (streaming mode, multicast address)...**                                                                                                  | Opens [Settings > Network](https://docs.vega365.com/surestream/management-client/settings.md#network).                                                                                |
| **Multicast quality...**                                                                                                                            | Opens [Settings > Multicast quality](https://docs.vega365.com/surestream/management-client/settings.md#multicast-quality).                                                            |
| **Add to SureStream...** / **Remove from SureStream...**                                                                                            | As the buttons.                                                                                                                                                                       |
| **Open camera web page**                                                                                                                            | Opens the camera's web page in the browser.                                                                                                                                           |
| **Copy details**                                                                                                                                    | Copies the camera's name, address, status, reason and fix.                                                                                                                            |

Cameras not in SureStream offer only **Add to SureStream**, **Open camera web page** and **Copy details**.

## Adding cameras

In the **Not in SureStream** view, select cameras (or a recording server row) and click **Add to SureStream**. The [setup's steps](https://docs.vega365.com/surestream/management-client/first-time-setup.md) run for only these cameras: Camera access (tested), Streaming, Multicast addresses (from the site's block, avoiding the addresses in use), Multicast quality, Add, Mirroring and Review. The cameras already in SureStream are not changed.

<figure><img src="https://2606467887-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrW97Kdzpc3CRKor6jdzu%2Fuploads%2Fgit-blob-c6755762e1cbef92bcb9862ed7f3f4dba1c60761%2Fmc-dashboard-not-in-surestream.png?alt=media" alt=""><figcaption></figcaption></figure>

If there aren't enough licences, SureStream says how many more camera devices can be licensed. A camera on a device that is already licensed (another channel of the same encoder) needs no new licence.

## Removing cameras

Select cameras in the **In SureStream** view and click **Remove from SureStream**. After you confirm, SureStream deletes the streaming profile it set up on each camera (SureStream\_1), which frees its encoder, and frees the licences. The cameras stay in XProtect and their own settings aren't changed. Smart Clients stop streaming them directly once the change is saved (automatically).

A camera that can't be reached is still removed from SureStream; its profile stays on the camera (the log says which).

Cameras **deleted in XProtect** are removed without contacting them: right-click > **Remove from SureStream (deleted in XProtect)**.

## Sync with XProtect

When a camera's password or stream changes in XProtect, select the cameras and click **Sync with XProtect**:

* **Passwords**, by the camera's [Camera access](https://docs.vega365.com/surestream/management-client/first-time-setup.md#the-camera-access-choices):
  * *Same account as XProtect*: SureStream takes XProtect's new password.
  * *Its own ONVIF account, you change its password*: left as it is.
  * *Its own ONVIF account, kept the same as XProtect's*: SureStream sets XProtect's new password on that account on the camera, after you confirm.
* **Streams**: where XProtect's stream changed (resolution, codec, frame rate), SureStream sets up its stream again, keeping each camera's multicast quality.

Then the cameras are tested and the change is saved; Smart Clients showing them reconnect. A note says what was changed.
