> For the complete documentation index, see [llms.txt](https://docs.vega365.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.vega365.com/surestream/smart-client/the-surestream-tile.md).

# The SureStream Tile

A SureStream tile plays live video directly from its camera. It works the same whether or not the XProtect servers are running.

<figure><img src="https://2606467887-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrW97Kdzpc3CRKor6jdzu%2Fuploads%2Fgit-blob-bc90601bfd1375da7277ec3bfa14d2fd9c65d5e2%2Fsc-tile-playing.png?alt=media" alt=""><figcaption><p>A SureStream tile playing, with its header and toolbar</p></figcaption></figure>

## Header

The slim header shows, from left to right:

* the **camera button** (choose the camera for this tile),
* the camera's name (and address),
* **SureStream** and the Vega logo, so operators can tell a SureStream tile from a normal XProtect tile.

A tile with no camera yet shows **◂ Choose a camera** next to the camera button.

<figure><img src="https://2606467887-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrW97Kdzpc3CRKor6jdzu%2Fuploads%2Fgit-blob-3131d6ee6365b315b9433edc26c0960eaddd6fc6%2Fsc-card-no-camera.png?alt=media" alt=""><figcaption><p>A tile with no camera chosen</p></figcaption></figure>

## Toolbar

The tile's toolbar (shown when the mouse is over the tile) has four SureStream buttons:

| Button          | What it does                                                                                                                                                                             |
| --------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **M** / **U**   | The camera streams **M**ulticast or **U**nicast. Click to switch. Shown only for cameras set to *Multicast + unicast* that have both streams. The choice lasts until the tile is closed. |
| **Snapshot**    | Saves the picture as shown to `Pictures\SureStream` (`<camera> <date> <time>.png`). Also works in Playback.                                                                              |
| **Stream info** | What this tile receives: resolution, codec, decoding, packet loss. See below.                                                                                                            |
| **Reconnect**   | Restarts this tile's stream now.                                                                                                                                                         |

<figure><img src="https://2606467887-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrW97Kdzpc3CRKor6jdzu%2Fuploads%2Fgit-blob-948d3486b7135b3eb1f5e464ce4a3e6c104d79c8%2Fsc-toolbar.png?alt=media" alt=""><figcaption><p>The toolbar: Print, M (multicast), Snapshot, Stream info, Reconnect</p></figcaption></figure>

XProtect's **Print** button prints the picture as shown.

### Stream info

<figure><img src="https://2606467887-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrW97Kdzpc3CRKor6jdzu%2Fuploads%2Fgit-blob-2ac99c9f91de8db2d4757a425d297b3f34973d91%2Fsc-stream-info.png?alt=media" alt=""><figcaption><p>Stream info</p></figcaption></figure>

The **Stream info** window updates every second. **Copy** copies its text (to send to support).

* **Received** is what this tile gets from the camera; **Set up in SureStream** is the stream SureStream set up on the camera. The camera's user name and password are never shown.
* **Decoding** says whether the graphics card (GPU) or the processor (CPU) decodes the video. When it is the processor, **Decoder** says why, for example *CPU decode: no Direct3D 11 video decode support on this GPU/driver*. Update the graphics driver, or use a PC with a supported graphics card (see [Requirements](https://docs.vega365.com/surestream/getting-started/requirements.md)).
* **Packets lost** above zero points to the network (or, for multicast, to multicast forwarding).
* **Frame reduction: On (key frames only: this PC is busy)** appears when the PC can't keep up; SureStream then decodes only key frames until it catches up.
* **Set up in SureStream** shows the stream SureStream set up on the camera, or the [multicast quality](https://docs.vega365.com/surestream/management-client/first-time-setup.md#multicast-quality-optional) when it is Medium or Low.

## PTZ

For PTZ cameras, a round, see-through PTZ pad appears at the bottom left of the video when the mouse moves over it, and hides 10 seconds after the mouse stops.

<figure><img src="https://2606467887-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrW97Kdzpc3CRKor6jdzu%2Fuploads%2Fgit-blob-fc58317224e905ae1d64728526769ec5f4b14336%2Fsc-ptz-pad.png?alt=media" alt=""><figcaption><p>The PTZ pad over the video</p></figcaption></figure>

* **Tap** an arrow for a small step; **hold** it to move, faster the longer you hold.
* **Home** moves the camera to its home position. **+** and **−** zoom; the mouse wheel over the video zooms too.
* **Drag** on the video to steer: the further you drag, the faster.
* **Click** near an edge of the video to move one step that way.
* Moves are slower when zoomed in.
* The settings key opens **PTZ Settings**: the top speed of **Pan / tilt** and **Zoom**, from Fine to Fast. They are saved with the tile in the view.

<figure><img src="https://2606467887-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FrW97Kdzpc3CRKor6jdzu%2Fuploads%2Fgit-blob-547f1d433dfe13d5900138c78f01a4c8c4dbe161%2Fsc-dialog-ptz-settings.png?alt=media" alt=""><figcaption><p>PTZ Settings</p></figcaption></figure>

PTZ commands go straight from the Smart Client to the camera, bypassing all XProtect services. PTZ is available only to users with the XProtect **PTZ** permission on the camera. Directions follow the camera's [mirroring and rotation](https://docs.vega365.com/surestream/management-client/settings.md#mirroring-and-rotation).

## Playback

In the Playback tab, a SureStream tile shows recorded video from the XProtect recording server, like a normal tile (SureStream doesn't record). Playback needs the recording server; it doesn't work during a server outage.

## Behind the scenes

* **Permissions.** SureStream checks the user's XProtect permissions for the camera (Live, PTZ) every minute and when the configuration changes. If Live is taken away, the tile stops and says so; it starts again when the permission is given back.
* **Configuration changes** made in the Management Client reach the Smart Clients without logging in again. Tiles whose camera changed reconnect; tiles of a removed camera say so.
* **Hidden tiles** (another tile maximised, a minimised window) stop streaming and start again when shown.
* **A busy PC.** When the processor is above 80%, new streams wait until the load drops (the tile says *This PC is overloaded*).
* **Reconnecting.** If the video stops, the tile reconnects by itself and says what it is doing.
