> For the complete documentation index, see [llms.txt](https://docs.vega365.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.vega365.com/xport/user-manual/upgrade-everything-workflow/step-by-step-user-guide/devices/set-up-a-device-migration-plan.md).

# Set up a Device Migration Plan

Associate source devices to desired destinations

## Capability Statement

With XPort, you can freely drag-and-drop cameras from any source recorder to any destination recorder—move any camera to any recorder, exactly where you want it.

<figure><img src="https://771655570-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fxj7X0c61rEOwTqSjg2jo%2Fuploads%2F3rVJu85uEBugECYFJ6Nm%2FMigrate%20All-In-One%20Servers%20(67).png?alt=media&amp;token=72e48755-7e27-4a43-a103-721249d66e94" alt="" width="375"><figcaption><p>Device Migration Plan</p></figcaption></figure>

## Steps

{% stepper %}
{% step %}

### Drag/Drop Devices from the Source Recorders to the Destination Recorders

1. All source and destination recorders are listed.
2. Click to select devices from the source recorders.
3. Drag and drop selections to destination recorders to signal intent.
   1. Re-distribute source devices among destination recorders if needed.

<figure><img src="https://771655570-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fxj7X0c61rEOwTqSjg2jo%2Fuploads%2FsCsEj9ZJDHo2TZgSejkk%2Fdrag_drop_devices.png?alt=media&amp;token=9f26e6a4-ab4b-424b-9da4-f9470716efb0" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Choose Device Properties

1. XPort provides **fine-grained control** over specific device properties that one wishes to retain.
2. All properties are retained by default.

<figure><img src="https://771655570-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fxj7X0c61rEOwTqSjg2jo%2Fuploads%2Fzktf8wUZUmyVeNWUYgt1%2Fdevice_properties_1.png?alt=media&amp;token=f06ed70d-8e3d-40f3-bd61-20029201b383" alt=""><figcaption><p>Hardware Properties</p></figcaption></figure>

<figure><img src="https://771655570-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fxj7X0c61rEOwTqSjg2jo%2Fuploads%2FtoyYAg7fQH3KPHrNMEbC%2Fdevice_properties_2.png?alt=media&amp;token=1572ccb0-ce63-4495-a44a-d426dbb75a7b" alt=""><figcaption><p>Camera Properties</p></figcaption></figure>

<figure><img src="https://771655570-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fxj7X0c61rEOwTqSjg2jo%2Fuploads%2FbkJejVUmPCumOIyFB5FR%2Fdevice_properties_3.png?alt=media&amp;token=24357de4-1088-435d-88e2-02dba73843d7" alt=""><figcaption><p>Groups</p></figcaption></figure>

{% endstep %}
{% endstepper %}

Click "**>"** in the Wizard to continue.
